Take The Tour - Page 2

The initial design process

Initially, the design (clients own or original), is reviewed by our own in-house ceramic printers, who will be adapting each piece in the collection accordingly.

"Black impressions" of the design are fitted to the proposed range of china and shown to the client. Their thoughts and suggestions are then taken into consideration.

"Fine tuning" can be applied at every stage of the design process. This ensures that the first proofing of the collection meets the specification required by the client. We respect that each client understands best the needs of their own clientele.

Back to our designers

We will then consult with our own designers and explain the clients further requirements.

Samples are then produced, decorated and gilded.

Decorating

The transfers are applied by hand, as is the gold if used and pieces are then fired again to approximately 820°C, which seals the decoration into the glaze.

The decorating process may take several firings depending on the complexity of the decorating.Whether it is a small tankard or a 12 inch plate the transfer is applied with the same care and attention.

It is at this stage that it is vital to spot any inconsistencies in the china as it is impossible to go back once the china has been fired.

Final "bringing together"

The client will have expressed a colour scheme for both the rigid, "logo embossed" box and tissue.

A collectors card will also require the clients input. Any final adjustments, will be made if necessary and presented to the client for production approval.